Intel® Rapid Storage Technology 11.2.0.1006 Production Version Release Notes
07 June 2012
DISCLAIMER: Information in this document is provided in connection with Intel products. No license, express or implied, by estoppels or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty relating to sale and/or use of Intel products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, lifesaving, or life-sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
* Other names and brands may be claimed as the property of others.
Copyright © Intel Corporation 2000-2012
Supported Operating Systems
Microsoft Windows 7*
Microsoft Windows 7 x64 Edition*
Microsoft Windows Vista*
Microsoft Windows Vista x64 Edition*
Microsoft Windows XP Home Edition*
Microsoft Windows XP Professional*
Microsoft Windows XP x64 EditionMicrosoft Windows Server 2008* ++
Microsoft Windows Server 2008 x64 Edition*++
Microsoft Windows Server 2008 R2 x64* ++
Microsoft Windows Server 2003* ++
Microsoft Windows Server 2003 x64 Edition*++Microsoft Windows Media Center Edition*
++ Not available on mobile platforms
Revision History
Date
Driver Revision
Build Number
07 June 2012
11.2.0.1006 Production Version
1006
01 June 2012
11.2.0.1006 Production Candidate
1006
Notes:
1. Known Issue is defined as a potential
RST issue that has been replicated internally by the Rapid Storage Technology
team but has not been root caused to be an RST defect.
2. Microsoft Windows Vista* (32 & 64-bit) is not supported on
Panther Point based platforms.
3.
The RAID OROM version for this release is 11.2.0.1527, the driver version and
the user interface version is 11.2.0.1006.
4.
This release includes both the RAIDCFG32 & RAIDCFG64 utilities which are
contained in the RAIDcmd utility component of this kit. Note
that the RAIDCFG32/64 utility version is 11.2.0.1007.
5. When an ODD is in the Zero Power state,
some ODDs may disappear when a hardware re-scan is initiated via the Windows
Device Manager. A second hardware re-scan conducted before the Zero Power
Idle Timeout value is reached (default is 60s) will return the drive to an OS
visible state. This behavior is believed to be related to the length of
time an ODD requires to become ready during power on from the zero-power state.
6.
Microsoft* .NET Framework 3.0 is required to be installed on the system in
order for the Intel® Rapid Storage Technology User Interface to install. Note that not all Microsoft* Operating
Systems have .NET 3.0 installed by default.
Refer to the Microsoft* website for details.
7. A Vista OS Installation using a Matrix RAID Array on a system with a 9.5 or newer OROM requires the user to F6 a 9.5 or newer driver.
8. Possible issue where RST is slow to start on Windows XP or Vista with .NET 3.0
Issue description: Under certain network conditions, on systems with .NET 3.0, the RST application and notification icon (a.k.a. tray icon) may take about a minute to start.
Resolution: Contact Microsoft* to receive the hot fix described by KB article 936707 or upgrade to .NET 3.5.
9. Possible Issue regarding File writes on Windows XP with Service Pack 2
Issue description: System hangs, ERROR_NO_SYSTEM_RESOURCES or ERROR_NOT_ENOUGH_QUOTA observed when writing large numbers of files on Windows XP with Service Pack 2.
Resolution: Contact Microsoft* to receive the hot fix described by KB article 888413.
Resolved Issues
|
Resolved Issues in 11.2.0.1006 PV |
|
||
|
Reference No |
Description |
Affected OS's |
|
|
4158612 |
RAID0
sometimes stops at BIOS prompt screen for 20mins when performing extended S4
cycling |
Win7 |
|
|
4158788 |
RAID
OROM doesn't always detect internal HDD |
Other,
Win7, Win7-64 |
|
|
4159711 |
Accelerating
system disk with a former cache SSD (that has had metadata reset) induces
BSOD 0x7E |
Win7-64 |
|
|
4159556 |
UI
showing "unknown error" when trying to accelerate with partitioned
SSD without enough free space for cache volume |
Win7-64, Windows8-64 |
|
|
4159315 |
Customer
specific function doesn't work on systems configured as SRT |
Win7 |
|
|
4159204 |
Write-error
occurs when burning DVD+R DL media. |
Win7-64 Win7-64, Win7 Win7-64 |
|
|
4159287 |
Data
partition won't be created because the rest of the mSATA's
unallocated space can't be seen |
Win7-64, Win7 |
|
|
3235185 |
Activate
Port x LED, doesn't work if SATA disk drives ports are not in sequential
order. |
Win7 |
|
|
3237349 |
WHQL
failure when Zero power ODD enabled |
Win7-64 |
|
|
4158723 |
RST
icon always disappears even when "show the notification area icon"
is checked |
Win7,Win7-64 |
|
|
4158744 |
Driver
is sending park head command to SSD when it is not supposed to |
Win7,Win7-64 |
|
|
4158827 |
System
will exhibit a 0x9F if left with a blinking cursor for ~10min |
Win7,Win7-64 |
|
|
4158983 |
0xD1
BSOD during extended suspend resume cycling |
Win7-64 |
|
|
4159020 |
RAIDCfg64.exe
removes the partition table when configured. |
Win7-64 |
|
Known Issues
|
Known Issues in 11.2.0.1006 PV |
|
||
|
Reference No |
Description |
Affected OS's |
|
|
4159757 |
Notebook
ODD isn't available after hot dock unit |
Win7,Win7-64 |
|
|
4159511 |
Error
Message when running S3 Stress Test (with a specific utility) |
Win7 |
|
|
4159178 |
Smart
Response Technology (SRT) with SSD performance is low in full size (32G)
cache than 18.6GB of SRT maximized mode |
Win7-64,Win7 |
|
|
4159494 |
System
will not boot into XP OS on degraded RAID 1 |
Windows
XP |
|
|
4159428 |
0x7E
BSOD observed sporadically during extended suspend resume testing |
Win7-64 |
|
|
4158716 |
0x0A
BSOD observed sporadically during extended S4 testing |
Win7 |
|
|
4159503 |
Reboot
long run will hang up at start windows with RapidStartTechnology+SmartResponseTechnology
running |
Win7,Win7-64 |
|
|
3237242 |
SRT
enabled (with Intel Desktop Utility installed) causes audio stuttering in RST
10.x |
Win7,Win7-64 |
|
|
0x7a BSOD and 0xF4 BSOD (when disabling acceleration with HDD ATA Power-Up in
Standby (PUIS) Supporting Intel® Smart Connect) |
Win7-64 |
||
|
4158521 |
A locked member disk of R5 or R0 volume fails after OS is
shutdown and then the disk is unlocked. |
Win7-64 |
|
|
3237351 |
HDD ATA
Power-Up in Standby (PUIS) Supporting Intel® Smart Connect: 0x7E BSOD observed when opening UI on a spun down disk,
and registry key for debug prints is enabled |
Win7,Win7-64 |
|
|
3236551 |
Accelerate button shows up in the RST UI after booting with no
SSD attached and then hot plugging it during OS runtime |
Win7-64 |
|
|
3005451 |
Accessibility issue - Incorrect font size in high contrast
settings for Help |
Vista,Win7,Windows XP |
|
|
3007190 |
After 2500 Caching mode changes on disk 0, disk 1 cannot be
accelerated |
Vista,Vista-64,Win7,Win7-64,Windows 2008,Windows 2008-64 |
|
|
3235083 |
BSOD 0x50 after disconnecting cache volume |
Win7-64 |
|
|
3234672 |
BSOD 0x7E with RST Caching and dirty shutdowns |
Vista-64 |
|
|
3234977 |
BSOD 0x9086 sporadically observed after extended S4 cycling |
Win7-64 |
|
|
3236284 |
BSOD 0x9086; Trying to unlock a drive that is part of an
accelerated volume causes the UI/OS to freeze |
Win7 |
|
|
4159298 |
CD door opening when waiting for ZPODD awake |
Win7 |
|
|
3234592 |
SRT: Cached HDD goes failed when I/O to the SSD are failed |
Win7-64 |
|
|
3006764 |
SRT: Can't re-use SSD for RST Caching until after reboot when it
was failed and marked normal |
Win7 |
|
|
3234432 |
Driver does not correctly unregister for OS callbacks and BSODs
on driver unload |
Win7,Win7-64 |
|
|
4158523 |
Driver does not detect SRT Acceleration SSD when inserted |
Windows 8 - 64 |
|
|
3006861 |
Enhancements to error handling in resume path |
Win7 |
|
|
3236121 |
Enlarging the UI window by double clicking the top bar causes
the user screen to change |
Win7-64,Windows XP-64 |
|
|
3006031 |
Error Injection Causes Non-NCQ Data verification failure |
Win7 |
|
|
3236282 |
Error pop-up message when opening RST Tray Icon after boot,
service not running yet |
Win7-64 |
|
|
3237299 |
F6 install cannot fully format the volume of a GPT 6-drive RAID0
with all 3TB drives |
Vista-64 |
|
|
4159769 |
Specific SSD's are disappearing or not being properly enumerated
in the OROM. |
Windows 8 - 64 |
|
|
3235466 |
Maximized Accelerated disk/volume is not enumerated as
Accelerated by the RST driver after the OS doesn’t shutdown cleanly |
Win7-64 |
|
|
OS SMART Enable command to RAID volume not being sent to member
disks |
Win7 |
||
|
3236512 |
Performing a dirty shutdown on an accelerated MBR formatted
volume prevents any further disks to formatted in MBR. |
Win7-64 |
|
|
4158756 |
RAIDCFG32: Creating an nvcache volume
named "SSDSpace" via RAIDCFG32 will cause
a 'name not unique' exception to be thrown, create a cache SSD with a single
RAID0 volume on it, and cause the Accelerate button to disappear from within
the RST UI |
Win7-64 |
|
|
3006316 |
RAIDCfg32 does not check if RST Cache device is
internal/external |
Win7-64 |
|
|
4158597 |
Smart Response Technology (SRT): 0x7E BSOD occurs after
hibernation with a unlocked SSD; disk/volume accelerated in max mode |
Win7-64 |
|
|
4158594 |
Smart Response Technology: BSOD 0x9086 after unlocking disk from
cold boot/dirty shutdown with SRT enabled |
Win7-64 |
|
|
3237271 |
RST UI allows Volume Name to begin with a Space Character |
Win7,Win7-64 |
|
|
3234908 |
txtsetup.oem file doesn't contain all the Device ID's |
Windows XP |
|
|
3006972 |
Reset cache SSD to Passthru looks like
it works, but doesn't when writes are failed to SSD. |
Win7-64 |
|
|
3236290 |
Resumption from Hibernation on a Migrating CVFD (Create Volume
From Disk) R1 volume Induces BSOD 0x9086 if a non-OS RAID volume is deleted
before the Resumption Occurs |
Win7-64 |
|
|
4158522 |
SRT: Booting to an accelerated, Degraded R1 volume that is
re-inserted fails and induces BSOD 0x7B |
Win7-64 |
|
|
3236644 |
SRT: Driver fails to enumerate an accelerated disk or volume
during an F6 install if a system disk is already attached to the system |
Win7-64 |
|
|
3237367 |
SRT: Partitioned drive is missing if remove power from the system
while IO is running |
Win7 |
|
|
4158779 |
System Report display incorrect device type for ODDs |
Vista,Win7,Windows XP |
|
|
3006373 |
Tray icon disappears prematurely |
Vista,Vista-64,Win7,Win7-64,Windows 2003,Windows 2003-64,Windows
2008,Windows 2008-64,Windows Media Center,Windows XP,Windows XP-64 |
|
|
4158578 |
UI: "Test status: In Progress" never appears when
'SMTP Host*:' is Incorrect |
Win7-64,Windows 2008-64,Windows 8 - 64 |
|
|
3236630 |
Zpodd: mediaPresent state mismatch (False) after S3 |
Win7-64 |
|